PF4 Kit ELISA

N° du produit ABIN8056299

Ce kit ELISA Colorimetric est destiné à la mesure quantitative de Lapin PF4.

Aperçu rapide pour PF4 Kit ELISA (ABIN8056299)

Antigène: PF4 (Platelet Factor 4 (PF4))

Reactivité: Lapin

Méthode de détection: Colorimetric

Type de méthode: Competition ELISA

Gamme de detection: 2.47 ng/mL - 200 ng/mL

Application: ELISA

Type d'échantillon: Cell Culture Supernatant, Platelet-Poor Plasma

Détail du produit PF4 Kit ELISA

Seuil minimal de détection: 2.47 ng/mL

Fonction: ELISA Kit for Platelet Factor 4 (PF4)

Analytical Method: Quantitative

Specificité:

This assay has high sensitivity and excellent specificity for detection of Platelet Factor 4 (PF4).
No significant cross-reactivity or interference between Platelet Factor 4 (PF4) and analogues was observed.

Sensibilité: < 0.87 ng/mL

Ingrédients:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• Detection Reagent B
• Assay Diluent B
• TMB Substrate
• Stop Solution
• Wash Buffer (30X)
• Instruction manual

Matériel non inclus:

• Microplate reader with 450 ± 10nm filter.
• Precision single or multi-channel pipettes and disposable tips.
• Eppendorf Tubes for diluting samples.
• Deionized or distilled water.
• Absorbent paper for blotting the microtiter plate.
• Container for Wash Solution

Information d'application

Volume d'échantillon: 50 μL

Durée du test: 2 h

Plaque: Pre-coated

Protocole: 1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

Précision du teste:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Platelet Factor 4 (PF4) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Platelet Factor 4 (PF4) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Stockage

Conseil sur la manipulation:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Stock: 4 °C,-20 °C

Stockage commentaire:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Date de péremption: 6 months

Détail du antigène

Antigène: PF4 (Platelet Factor 4 (PF4))

Autre désignation: Platelet Factor 4

Sujet: CXCL4, SCYB4, Chemokine C-X-C-Motif Ligand 4, Oncostatin-A, Iroplact