Biotin anticorps (DyLight 800)
Aperçu rapide pour Biotin anticorps (DyLight 800) (ABIN6720668)
Antigène
Hôte
Clonalité
Conjugué
Application
-
-
N° du produit (Fournisseur)
- 600-445-098
-
Fournisseur
- Rockland
-
Fonction
- Biotin Antibody Dylight™ 800 Conjugated
-
Réactivité croisée (Details)
- Assay by immunoelectrophoresis resulted in a single precipitin arc against anti-Rabbit Serum, Biotin conjugated IgG and Biotin conjugated Bovine Serum Albumin.
-
Purification
- This product was prepared from monospecific antiserum by immunoaffinity chromatography using Biotin coupled to sepharose beads.
-
Immunogène
- Biotin conjugated to Keyhole Limpet Hemocyanin (KLH)
-
Isotype
- IgG
-
Labeling Ratio
- 2.5
-
-
-
-
Indications d'application
-
FLISA_Dilution: >1:20,000
IF_Microscopy_Dilution: >1:5,000
Western_Blot_Dilution: 1:10,000 - 1:25,000
Other: User Optimized
-
Commentaires
-
Anti-Biotin DyLight 800 Conjugated Antibody has been tested by western blot. This product is designed for immunofluorescence microscopy, fluorescence based plate assays (FLISA) and fluorescent western blotting. This product is also suitable for multiplex analysis, including multicolor imaging, utilizing various commercial platforms. The emission spectra for this DyLight™ conjugate match the principle output wavelengths of most common fluorescence instrumentation.
-
Restrictions
- For Research Use only
-
-
- by
- Prof. Merighi, Laboratory of Neurobiology, Department of Veterinary Sciences, University of Turin
- No.
- #104645
- Date
- 09.11.2026
- Antigène
- Biotin
- Numéro du lot
- 24716
- Application validée
- Immunohistochemistry
- Contrôle positif
Sections from the same tissues were incubated with an anti-digoxigenin antibody conjugated with alkaline phosphatase (AP) and developed with NBT/BCIP solution.
- Contrôle négative
Omission of Terminal transferase.
- Conclusion
The antibody works in IHC-P at a concentration of 1:500-1:5000.
- Anticorps primaire
- ABIN6720668
- Anticorps secondaire
- Full Protocol
- Sample analyzed: P5 CD1 mouse brain
- Paraffin-embedded slices (7 µm thick) were deparaffinized and rehydrated through a graded series of alcohols and distilled water (dH2O).
- Sections were incubated in proteinase K [20 µg/mL] for 15 minutes at room temperature (RT).
- 4 × 2 minutes washing in double distilled water (ddH2O).
- Sections were briefly washed in DN buffer and incubated in DNase [1 µg/mL] for 10 minutes at RT.
- 4 × 2 minutes washing in ddH2O.
- 5 minutes washing in TDT buffer at RT.
- Sections were incubated in TDT buffer added with Terminal transferase [0.05 U/µL] and digoxigenin-11-dUTP [10 µM] for 2 hours at +37 °C.
- 15 minutes washing in TB buffer at RT.
- 5 minutes washing in ddH2O + 5 minutes washing in 0.01 M PBS.
- Sections were incubated with the primary antibody at the following dilutions of 1:50, 1:200, 1:500, overnight at +4 °C (primary antibody was diluted in PLL/BSA/PBS diluent added with 5% BSA).
- 3 × 5-minute washes in 0.01 M PBS.
- Incubation with the anti-mouse secondary antibody 1:1000 in PLL/BSA/PBS diluent, 1 hour at RT.
- 3 × 5-minute washes in 0.01 M PBS.
- Nuclear counterstaining was performed with 4′,6-Diamidine-2′-phenylindole dihydrochloride (DAPI) [1 µg/mL], 2 minutes.
- 2 × 5 minutes washing in 0.01 M PBS.
- Specimens were mounted in Fluoroshield mounting medium (Sigma).
- Images were acquired with a Leica DM 6000B fluorescence microscope with a digital camera at 40× magnification.
OTHER PERTINENT REAGENTS USED:
- Proteinase K (Thermo Scientific, Catalog # EO0491)
- DNase I (in the kit by Sigma, Catalog # AMP-D1)
- Terminal transferase (in the kit by Jena Biosciences, Catalog # APP-002)
- Digoxigenin-11-dUTP (Roche, Catalog # 11573179910)
- DN buffer: Tris base [30 mM] pH 7.2, sodium cacodylate [140 mM], magnesium chloride [4 mM], DTT [0.1 mM] in dH2O
- TDT buffer: Tris base [30 mM] pH 7.2, sodium cacodylate [140 mM], cobalt chloride [1 mM] in dH2O
- TB buffer: sodium chloride [300 mM], sodium citrate [30 mM] in dH2O
- Notes
To exclude any nonspecific signal due to the secondary antibody, one control slice was processed for each experimental procedure, omitting the primary antibody.
Validation #104645 (Immunohistochemistry)
Validation ImagesProtocole -
-
Format
- Lyophilized
-
Reconstitution
-
Reconstitution_Buffer: Restore with deionized water (or equivalent)
Reconstitution_Volume: 100 μL
-
Buffer
-
Buffer: 0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2
Stabilizer: 10 mg/mL Bovine Serum Albumin (BSA) - Immunoglobulin and Protease free
Preservative: 0.01 % (w/v) Sodium Azide -
Agent conservateur
- Sodium azide
-
Précaution d'utilisation
- This product contains Sodium azide: a POISONOUS AND HAZARDOUS SUBSTANCE which should be handled by trained staff only.
-
Stock
- 4 °C,-20 °C
-
Stockage commentaire
- Store vial at 4° C prior to restoration. For extended storage aliquot contents and freeze at -20° C or below. Avoid cycles of freezing and thawing. Centrifuge product if not completely clear after standing at room temperature. This product is stable for several weeks at 4° C as an undiluted liquid. Dilute only prior to immediate use.
-
Date de péremption
- 12 months
-
-
- Biotin
-
Classe de substances
- Chemical
-
Sujet
-
Synonyms: rabbit anti-Biotin Antibody Dylight™ 800 Conjugated, rabbit anti Biotin Antibody Dylight™ 800 Conjugated
Background: Biotin Antibody detects Biotin. Biotin is a water-soluble B-complex vitamin (vitamin B7). It is composed of a ureido (tetrahydroimidizalone) ring fused with a tetrahydrothiophene ring. A valeric acid substituent is attached to one of the carbon atoms of the tetrahydrothiophene ring. Biotin is a coenzyme for carboxylase enzymes, involved in the synthesis of fatty acids, isoleucine, and valine, and in gluconeogenesis. Biotin is necessary for cell growth, the production of fatty acids, and the metabolism of fats and amino acids. Anti-Biotin DyLight Conjugated Antibody is ideal for investigators involved in Cell Signaling and Cell Biology research.
Antigène
-
(1 validation)