PLAUR Kit ELISA

N° du produit ABIN411366

Ce kit ELISA Humain PLAUR est un kit ELISA Colorimetric conçu pour quantifier Humain PLAUR.

Aperçu rapide pour PLAUR Kit ELISA (ABIN411366)

Antigène: PLAUR (Plasminogen Activator, Urokinase Receptor (PLAUR))

Épitope: AA 23-303

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 62.5-4000 pg/mL

Application: ELISA

Type d'échantillon: Cell Culture Supernatant, Serum, Plasma (heparin), Plasma (EDTA), Urine

Détail du produit PLAUR Kit ELISA

Seuil minimal de détection: 62.5 pg/mL

Fonction: Sandwich High Sensitivity ELISA kit for Quantitative Detection of Human uPAR

Marque: PicoKine™

Analytical Method: Quantitative

Specificité: Expression system for standard: NSO,L23-R303

Réactivité croisée (Details): There is no detectable cross-reactivity with other relevant proteins.

Sensibilité: <4pg/mL

Matériel non inclus: Microplate reader in standard size. Automated plate washer. Adjustable pipettes and pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection. Clean tubes and Eppendorf tubes. Washing buffer (neutral PBS or TBS). Preparation of 0.01M TBS: Add 1.2g Tris, 8.5g Nacl

Immunogène: Expression system for standard: NSO
Immunogen sequence: L23-R303

Information d'application

Indications d'application: Before using Kit, spin tubes and bring down all components to bottom of tube. Duplicate well assay was recommended for both standard and sample testing.

Commentaires:

Sequence similarities: Contains 3 UPAR/Ly6 domains.

Tissue Specificity: Expressed in neurons of the rolandic area of the brain (at protein level). Expressed in the brain.

Plaque: Pre-coated

Protocole: human uPAR ELISA Kit was based on standard sandwich enzyme-linked immune-sorbent assay technology. A monoclonal antibody from mouse specific for uPAR has been precoated onto 96-well plates. Standards (NSO,L23-R303) and test samples are added to the wells, a biotinylated detection polyclonal antibody from goat specific for uPAR is added subsequently and then followed by washing with PBS or TBS buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with PBS or TBS buffer. HRP substrate TMB was used to visualize HRP enzymatic reaction. TMB was catalyzed by HRP to produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional to the human uPAR amount of sample captured in plate.

Procédure de l'essai:

Aliquot 0.1 mL per well of the 4000pg/mL, 2000pg/mL, 1000pg/mL, 500pg/mL, 250pg/mL, 125pg/mL, 62.5pg/mL human uPAR standard solutions into the precoated 96-well plate. Add 0.1 mL of the sample diluent buffer into the control well (Zero well). Add 0.1 mL of each properly diluted sample of human cell culture supernates, serum, plasma(heparin, EDTA) or urine to each empty well. See "Sample Dilution Guideline" above for details. We recommend that each human uPAR standard solution and each sample is measured in duplicate.

Précision du teste:

• Sample 1: n=16, Mean(pg/ml): 240, Standard deviation: 8.16, CV(%): 3.4
• Sample 2: n=16, Mean(pg/ml): 1437, Standard deviation: 73.3, CV(%): 5.1
• Sample 3: n=16, Mean(pg/ml): 2682, Standard deviation: 120.7, CV(%): 4.5,
• Sample 1: n=24, Mean(pg/ml): 365, Standard deviation: 17.52, CV(%): 4.8
• Sample 2: n=24, Mean(pg/ml): 1624, Standard deviation: 105.6, CV(%): 6.5
• Sample 3: n=24, Mean(pg/ml): 3163, Standard deviation: 186.6, CV(%): 5.9

Restrictions: For Research Use only

Stockage

Conseil sur la manipulation: Avoid multiple freeze-thaw cycles.

Stock: -20 °C,4 °C

Stockage commentaire: Store at 4°C for 6 months, at -20°C for 12 months. Avoid multiple freeze-thaw cycles

Date de péremption: 12 months

Détail du antigène

Antigène: PLAUR (Plasminogen Activator, Urokinase Receptor (PLAUR))

Autre désignation: PLAUR

Sujet:

Protein Function: Acts as a receptor for urokinase plasminogen activator. Plays a role in localizing and promoting plasmin formation. Mediates the proteolysis-independent signal transduction activation effects of U-PA. It is subject to negative-feedback regulation by U-PA which cleaves it into an inactive form.

Background: The urokinase-type plasminogen activator receptor(uPAR) is a key molecule in the regulation of cell-surface plasminogen activation and, as such, plays an important role in many normal as well as pathological processes. The cDNA for Mo3, an activation antigen expressed by human monocytes and myelomonocytic cell lines after stimulation by a variety of agents. Mo3 expression in vivo is associated predominantly with macrophages in inflammatory sites. It is a highly glycosylated protein of about 50 kD in monocytes where it is anchored to the plasma membrane by glycosyl-phosphatidylinositol linkage. The complete coding sequence of the cDNA has been found to encode 335 amino acids including a predicted signal peptide of 22 residues and a hydrophobic C-terminal portion. Mo3 is identical to the human receptor for the urokinase plasminogen activator. UPAR is a useful prognostic marker for biologically aggressive forms of endometrial cancer. PLAUR is located at chromosome 19q13.1-q13.2. The standard product used in this kit is recombinant human uPAR, consisting of 287 amino acids with the molecular mass of 31KDa.

Synonyms: Urokinase plasminogen activator surface receptor,U-PAR,uPAR,Monocyte activation antigen Mo3,CD87,PLAUR,MO3, UPAR,

Full Gene Name: Urokinase plasminogen activator surface receptor

Cellular Localisation: Cell membrane . Cell projection, invadopodium membrane . Colocalized with FAP (seprase) preferentially at the cell surface of invadopodia membrane in a cytoskeleton-, integrin- and vitronectin-dependent manner..

ID gène: 5329

UniProt: Q03405

Pathways: Inositol Metabolic Process