Tel:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@anticorps-enligne.fr

ACP5 Kit ELISA

ACP5 Reactivité: Rat Colorimetric Sandwich ELISA 0.78 ng/mL - 50 ng/mL Plasma, Serum, Tissue Homogenate
N° du produit ABIN416089
  • Antigène Voir toutes ACP5 Kits ELISA
    ACP5 (Acid Phosphatase 5, Tartrate Resistant (ACP5))
    Reactivité
    • 5
    • 4
    • 3
    • 3
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Rat
    Méthode de détection
    Colorimetric
    Type de méthode
    Sandwich ELISA
    Gamme de detection
    0.78 ng/mL - 50 ng/mL
    Seuil minimal de détection
    0.78 ng/mL
    Application
    ELISA
    Fonction
    The kit is a sandwich enzyme immunoassay for in vitro quantitative measurement of ACP5 in Serum,Plasma,Tissue Homogenate,Biological Fluids
    Type d'échantillon
    Plasma, Serum, Tissue Homogenate
    Analytical Method
    Quantitative
    Specificité

    This assay has high sensitivity and excellent specificity for detection of Acid Phosphatase 5, Tartrate Resistant (ACP5).
    No significant cross-reactivity or interference between Acid Phosphatase 5, Tartrate Resistant (ACP5) and analogues was observed.

    Réactivité croisée (Details)
    No significant cross-reactivity or interference between Acid Phosphatase 5, Tartrate Resistant (ACP5) and analogues was observed.
    Sensibilité
    0.31 ng/mL
    Ingrédients
    • Pre-coated, ready to use 96-well strip plate, flat buttom
    • Plate sealer for 96 wells
    • Reference Standard
    • Standard Diluent
    • Detection Reagent A
    • Detection Reagent B
    • Assay Diluent A
    • Assay Diluent B
    • Reagent Diluent (if Detection Reagent is lyophilized)
    • TMB Substrate
    • Stop Solution
    • Wash Buffer (30 x concentrate)
    • Instruction manual
    Featured
    Discover our best selling ACP5 Kit ELISA
    Top Product
    Discover our top product ACP5 Kit ELISA
  • Indications d'application
    • Limited by the current condition and scientific technology, we cannot completely conduct the comprehensive identification and analysis on the raw material provided by suppliers. So there might be some qualitative and technical risks to use the kit.
    • The final experimental results will be closely related to validity of the products, operation skills of the end users and the experimental environments. Please make sure that sufficient samples are available.
    • Kits from different batches may be a little different in detection range, sensitivity and color developing time.
    • Do not mix or substitute reagents from one kit lot to another. Use only the reagents supplied by manufacturer.
    • Protect all reagents from strong light during storage and incubation. All the bottle caps of reagents should be covered tightly to prevent the evaporation and contamination of microorganism.
    • There may be some foggy substance in the wells when the plate is opened at the first time. It will not have any effect on the final assay results. Do not remove microtiter plate from the storage bag until needed.
    • Wrong operations during the reagents preparation and loading, as well as incorrect parameter setting for the plate reader may lead to incorrect results. A microplate plate reader with a bandwidth of 10nm or less and an optical density range of 0-3 O.D. or greater at 450 ± 10nm wavelength is acceptable for use in absorbance measurement. Please read the instruction carefully and adjust the instrument prior to the experiment.
    • Even the same operator might get different results in two separate experiments. In order to get better reproducible results, the operation of every step in the assay should be controlled. Furthermore, a preliminary experiment before assay for each batch is recommended.
    • Each kit has been strictly passed Q.C test. However, results from end users might be inconsistent with our in-house data due to some unexpected transportation conditions or different lab equipments. Intra-assay variance among kits from different batches might arise from above factors, too.
    • Kits from different manufacturers for the same item might produce different results, since we have not compared our products with other manufacturers.
    Commentaires

    Information on standard material:
    The standard might be recombinant protein or natural protein, that will depend on the specific kit. Moreover, the expression system is E.coli or yeast or mammal cell. There is 0.05% proclin 300 in the standard as preservative.

    Information on reagents:
    The stop solution used in the kit is sulfuric acid with concentration of 1 mol/L. And the wash solution is TBS. The standard diluent contains 0.02 % sodium azide, assay diluent A and assay diluent B contain 0.01% sodium azide. Some kits can contain is BSA in them.

    Information on antibodies:
    The provided antibodies and their host vary in different kits.

    Volume d'échantillon
    100 μL
    Durée du test
    3 h
    Plaque
    Pre-coated
    Protocole
    The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Acid Phosphatase 5, Tartrate Resistant (ACP5). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Acid Phosphatase 5, Tartrate Resistant (ACP5). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Acid Phosphatase 5, Tartrate Resistant (ACP5), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Acid Phosphatase 5, Tartrate Resistant (ACP5) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
    Préparation des réactifs
    1. Bring all kit components and samples to room temperature (18-25 °C) before use. If the kit will not be used up in one time, please only take out strips and reagents for present experiment, and leave the remaining strips and reagents in required condition.
    2. Standard - Reconstitute the Standard with 1.0 mL of Standard Diluent, keep for 10 minutes at room temperature, shake gently (not to foam). The concentration of the standard in the stock solution is 200 ng/mL. Firstly dilute the stock solution to 50 ng/mL and the diluted standard serves as the highest standard (50 ng/mL). Then prepare 7 tubes containing 0.5 mL Standard Diluent and use the diluted standard to produce a double dilution series. Mix each tube thoroughly before the next transfer. Set up 7 points of diluted standard such as 50 ng/mL, 25 ng/mL, 12.5 ng/mL, 6.25 ng/mL, 3.12 ng/mL, 1.56 ng/mL, 0.78 ng/mL, and the last microcentrifuge tube with Standard Diluent is the blank as 0 ng/mL.
    3. Detection Reagent A and Detection Reagent B - If lyophilized reconstitute the Detection Reagent A with 150μL of Reagent Diluent, keep for 10 minutes at room temperature, shake gently (not to foam). Briefly spin or centrifuge the stock Detection A and Detection B before use. Dilute them to the working concentration 100-fold with Assay Diluent A and B, respectively.
    4. Wash Solution - Dilute 20 mL of Wash Solution concentrate (30x) with 580 mL of deionized or distilled water to prepare 600 mL of Wash Solution (1x).
    5. TMB substrate - Aspirate the needed dosage of the solution with sterilized tips and do not dump the residual solution into the vial again.

    Note:

    1. Making serial dilution in the wells directly is not permitted.
    2. Prepare standards within 15 minutes before assay. Please do not dissolve the reagents at 37 °C directly.
    3. Please carefully reconstitute Standards or working Detection Reagent A and B according to the instruction, and avoid foaming and mix gently until the crystals are completely dissolved. To minimize imprecision caused by pipetting, use small volumes and ensure that pipettors are calibrated. It is recommended to suck more than 10μL for one pipetting.
    4. The reconstituted Standards, Detection Reagent A and Detection Reagent B can be used only once.
    5. If crystals have formed in the Wash Solution concentrate (30x), warm to room temperature and mix gently until the crystals are completely dissolved.
    6. Contaminated water or container for reagent preparation will influence the detection result.
    Précision du teste

    Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Acid Phosphatase 5, Tartrate Resistant (ACP5) were tested 20 times on one plate, respectively.
    Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Acid Phosphatase 5, Tartrate Resistant (ACP5) were tested on 3 different plates, 8 replicates in each plate.
    CV(%) = SD/meanX100
    Intra-Assay: CV<10%
    Inter-Assay: CV<12%

    Restrictions
    For Research Use only
  • Précaution d'utilisation
    The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
    Conseil sur la manipulation
    The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition.
    To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
    Stock
    4 °C
    Stockage commentaire
    • For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
    • For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
      Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
    • For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.
    Date de péremption
    6 months
  • Alkhamees, Al-Roujayee, Abuohashish, Ahmed: "Anti-osteoporotic effects of an antidepressant tianeptine on ovariectomized rats." dans: Biomedicine & pharmacotherapy, Vol. 87, pp. 575-582, (2017) (PubMed).

    Nowak, Matuszewska, Filipiak, Nikodem, Merwid-Ląd, Pieśniewska, Fereniec-Gołębiewska, Kwiatkowska, Szeląg: "The influence of bexarotene, a selective agonist of the retinoid receptor X (RXR), and tazarotene, a selective agonist of the retinoid acid receptor (RAR), on bone metabolism in rats." dans: Advances in medical sciences, Vol. 61, Issue 1, pp. 85-9, (2016) (PubMed).

    Stringhetta-Garcia, Singulani, Santos, Louzada, Nakamune, Chaves-Neto, Rossi, Ervolino, Dornelles: "The effects of strength training and raloxifene on bone health in aging ovariectomized rats." dans: Bone, Vol. 85, pp. 45-54, (2016) (PubMed).

    Kim, Lee, Jo, Song, Lim, Park, Bonewald, Kim: "Exendin-4 increases bone mineral density in type 2 diabetic OLETF rats potentially through the down-regulation of SOST/sclerostin in osteocytes." dans: Life sciences, Vol. 92, Issue 10, pp. 533-40, (2013) (PubMed).

    Colli, Okamoto, Spritzer, Dornelles: "Oxytocin promotes bone formation during the alveolar healing process in old acyclic female rats." dans: Archives of oral biology, Vol. 57, Issue 9, pp. 1290-7, (2012) (PubMed).

  • Antigène Voir toutes ACP5 Kits ELISA
    ACP5 (Acid Phosphatase 5, Tartrate Resistant (ACP5))
    Autre désignation
    ACP5 (ACP5 Produits)
    Synonymes
    SPENCDI Kit ELISA, TRAP Kit ELISA, acp5 Kit ELISA, sb:cb576 Kit ELISA, zgc:63825 Kit ELISA, wu:fb19f01 Kit ELISA, wu:fb30b03 Kit ELISA, wu:fi14e01 Kit ELISA, wu:fj66f03 Kit ELISA, MGC78938 Kit ELISA, MGC89674 Kit ELISA, TR-AP Kit ELISA, zgc:92339 Kit ELISA, TRACP Kit ELISA, TTRRAP Kit ELISA, Trap Kit ELISA, UF Kit ELISA, acid phosphatase 5, tartrate resistant Kit ELISA, acid phosphatase 5a, tartrate resistant Kit ELISA, acid phosphatase 5, tartrate resistant S homeolog Kit ELISA, tartrate resistant acid phosphatase Kit ELISA, Tartrate-resistant acid phosphatase type 5 Kit ELISA, tartrate-resistant acid phosphatase type 5 Kit ELISA, acid phosphatase 5b, tartrate resistant Kit ELISA, ACP5 Kit ELISA, acp5a Kit ELISA, acp5.S Kit ELISA, acp5 Kit ELISA, NAEGRDRAFT_81291 Kit ELISA, ppa5 Kit ELISA, LOC100282899 Kit ELISA, acp5b Kit ELISA, Acp5 Kit ELISA
    UniProt
    P29288
    Pathways
    Transition Metal Ion Homeostasis
Vous êtes ici:
Support technique