SAA Kit ELISA

N° du produit ABIN5519845

Ce kit ELISA Colorimetric est destiné à la mesure quantitative de Boeuf (Vache) SAA.

Aperçu rapide pour SAA Kit ELISA (ABIN5519845)

Antigène: SAA (Serum Amyloid A (SAA))

Reactivité: Boeuf (Vache)

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 9.375 ng/mL - 600 ng/mL

Application: ELISA

Type d'échantillon: Cell Culture Supernatant, Cell Samples, Plasma, Serum, Tissue Lysate

Détail du produit SAA Kit ELISA

Seuil minimal de détection: 9.375 ng/mL

Fonction: Bovine SAA (Serum amyloid A protein) ELISA Kit

Analytical Method: Quantitative

Specificité: Specifically binds with SAA , no obvious cross reaction with other analogues.

Sensibilité: 5.625 ng/mL

Ingrédients:

• ELISA Microplate(Dismountable)
• Lyophilized Standard
• Biotin-labeled Antibody
• HRP-Streptavidin Conjugate(SABC
• 100X)
• TMB Substrate
• Sample Dilution Buffer
• Stop Solution
• Plate Sealer
• Product Description

Matériel non inclus:

• Microplate reader (wavelength: 450nm)
• 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
• Automated plate washer or multi-channel pipette/5 mL pipettor
• Precision single (0.5-10μL
• 5-50μL
• 20-200μL
• 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
• Sterile tubes and Eppendorf tubes with disposable tips
• Absorbent paper and loading slot
• Deionized or distilled water

Information d'application

Indications d'application: Optimal working dilution should be determined by the investigator.

Commentaires:

Sandwich ELISA, Double Antibody

Volume d'échantillon: 100 μL

Durée du test: 4 h

Plaque: Pre-coated

Protocole: Step 1: Add 100 µL standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37 °C. Washing: Wash the plate twice without immersing. Step 2: Add 100 µL biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37 °C. Washing: Wash the plate three times and immerse for 1 min each time. Step 3: Add 100 µL HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37 °C. Washing: Wash the plate five times and immerse for 1 min each time. Step 4: Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 5: Add 50 µL stop solution. Read at 450nm immediately and calculate.

Préparation de l'échantillon:

The user should estimate the concentration of target protein in the test sample, and select a proper dilution factor to make the diluted target protein concentration fall in the optimal detection range of the kit. Dilute the sample with the provided dilution buffer, and several trials may be necessary. The test sample must be well mixed with the dilution buffer. And also standard curves and sample should be making in pre-experiment. If samples with very high concentrations, dilute samples with PBS first and then dilute the samples with Sample Dilution. The matrix components in the sample will affect the test results, which it need to be diluted at least 1/2 with Sample Dilution Buffer before testing!
In order to reduce the influence of the substrate on the experiment, we suggest preprocess the sample.

• Serum/Plasma: Add 30ul of Preprocess Agent A to 60ul Serum/Plasma samples, mix well, incubate 10 minutes at room temperature. Then add 30ul of Preprocess Agent B, mix well. Note: The matrix components in the sample will affect the test results. After sample pretreatment, it is still necessary to dilute at least 1/2 with Sample Dilution Buffer before testing! The sample dilution caused by pretreatment should be considered in the calculation of the result.
• Cell Culture Supernatant: Add 20ul of Preprocess Agent A to 100ul samples, mix well, incubate 10 minutes at room temperature. Then add 20ul of Preprocess Agent B, mix well. At last, add 60ul Sample dilution buffer, mix well and test. Note: Sample is diluted for 2 fold dilution (1/2).The sample dilution caused by pretreatment should be considered in the calculation of the result.

Restrictions: For Research Use only

Stockage

Conseil sur la manipulation: Avoid direct light exposure to antibody solutions

Stock: 4 °C

Stockage commentaire: Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

Date de péremption: 12 months

Détail du antigène

Antigène: SAA (Serum Amyloid A (SAA))

Autre désignation: SAA

Sujet: Serum amyloid A-1 protein, SAA, Amyloid protein A, Amyloid fibril protein AA, Serum amyloid protein A(2-104, Serum amyloid protein A(3-104, Serum amyloid protein A(2-103, Serum amyloid protein A(2-102, Serum amyloid protein A(4-101, SAA1

UniProt: P35541