Platelet activating factor (PAF) Kit ELISA
Aperçu rapide pour Platelet activating factor (PAF) Kit ELISA (ABIN5524324)
Antigène
Voir toutes Platelet activating factor (PAF) Kits ELISAReactivité
Méthode de détection
Type de méthode
Gamme de detection
Application
Type d'échantillon
-
-
Seuil minimal de détection
- 0.156 ng/mL
-
Fonction
- Rat PAF (Platelet Activating Factor) ELISA Kit
-
Analytical Method
- Quantitative
-
Specificité
- Specifically binds with PAF , no obvious cross reaction with other analogues.
-
Sensibilité
- 0.094 ng/mL
-
Ingrédients
-
- ELISA Microplate(Dismountable)
- Lyophilized Standard
- Lyophilized Biotin-labeled Antibody(Concentrated)
- Biotin-labeled Antibody
- HRP-Streptavidin Conjugate(SABC
- 100X)
- TMB Substrate
- Sample Dilution Buffer
- Stop Solution
- Plate Sealer
- Product Description
-
Matériel non inclus
-
- Microplate reader (wavelength: 450nm)
- 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
- Automated plate washer or multi-channel pipette/5 mL pipettor
- Precision single (0.5-10μL
- 5-50μL
- 20-200μL
- 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
- Sterile tubes and Eppendorf tubes with disposable tips
- Absorbent paper and loading slot
- Deionized or distilled water
-
-
-
-
Indications d'application
- Optimal working dilution should be determined by the investigator.
-
Commentaires
-
Competitive ELISA, Coated with Antigen
-
Volume d'échantillon
- 50 μL
-
Durée du test
- 2 h
-
Plaque
- Pre-coated
-
Protocole
- Step 1: Wash the plate twice before adding the standard and sample. Step 2: Add 50 µL standard or sample into each well. Immediately add 50 µL biotin-labeled antibody working solution into each well(The tip can't be reused after touching the liquid.), gently shake the plate for 1 min, seal closely and statically incubate for 45 minutes at 37 °C. Washing: Wash the plate three times and immerse for 1 min each time. Step 3: Add 100 µL HRP-Streptavidin Conjugate (SABC) working solution into each well, seal the plate and statically incubate for 30 minutes at 37 °C. Washing: Wash the plate five times and immerse for 1 min each time. Step 4: Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 5: Add 50 µL stop solution. Read at 450nm immediately and calculate.
-
Restrictions
- For Research Use only
-
-
-
Conseil sur la manipulation
- Avoid direct light exposure to antibody solutions
-
Stock
- 4 °C
-
Stockage commentaire
- Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant
-
Date de péremption
- 12 months
-
-
- Platelet activating factor (PAF)
-
Autre désignation
- PAF(Platelet Activating Factor)
-
Sujet
- PAF, Platelet Activating Factor
Antigène Voir toutes Platelet activating factor (PAF) Kits ELISA
-