Adenosine A3 Receptor Kit ELISA

N° du produit ABIN5706213

Le kit ELISA Adenosine A3 Receptor (ABIN5706213) Humain est un kit ELISA Colorimetric conçu pour quantifier Humain Adenosine A3 Receptor.

Aperçu rapide pour Adenosine A3 Receptor Kit ELISA (ABIN5706213)

Antigène: Adenosine A3 Receptor (ADORA3)

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 0.156 ng/mL - 10 ng/mL

Application: ELISA

Type d'échantillon: Cell Culture Supernatant, Cell Samples, Plasma, Serum, Tissue Lysate

Détail du produit Adenosine A3 Receptor Kit ELISA

Seuil minimal de détection: 0.156 ng/mL

Fonction: Human A3/ADORA3 (Adenosine A3 Receptor) ELISA Kit

Analytical Method: Quantitative

Specificité: Specifically binds with A3/ADORA3 , no obvious cross reaction with other analogues.

Sensibilité: 0.094 ng/mL

Ingrédients:

• ELISA Microplate(Dismountable)
• Lyophilized Standard
• Biotin-labeled Antibody
• HRP-Streptavidin Conjugate(SABC
• 100X)
• TMB Substrate
• Sample Dilution Buffer
• Stop Solution
• Plate Sealer
• Product Description

Matériel non inclus:

• Microplate reader (wavelength: 450nm)
• 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
• Automated plate washer or multi-channel pipette/5 mL pipettor
• Precision single (0.5-10μL
• 5-50μL
• 20-200μL
• 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
• Sterile tubes and Eppendorf tubes with disposable tips
• Absorbent paper and loading slot
• Deionized or distilled water

Information d'application

Indications d'application: Optimal working dilution should be determined by the investigator.

Commentaires:

Sandwich ELISA, Double Antibody

Volume d'échantillon: 100 μL

Durée du test: 4 h

Plaque: Pre-coated

Protocole: Step 1: Add 100 µL standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37 °C. Washing: Wash the plate twice without immersing. Step 2: Add 100 µL biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37 °C. Washing: Wash the plate three times and immerse for 1 min each time. Step 3: Add 100 µL HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37 °C. Washing: Wash the plate five times and immerse for 1 min each time. Step 4: Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 5: Add 50 µL stop solution. Read at 450nm immediately and calculate.

Restrictions: For Research Use only

Stockage

Conseil sur la manipulation: Avoid direct light exposure to antibody solutions

Stock: 4 °C

Stockage commentaire: Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

Date de péremption: 12 months

Détail du antigène

Antigène: Adenosine A3 Receptor (ADORA3)

Autre désignation: Adenosine A3 Receptor

Sujet: Adenosine receptor A3, ADORA3

UniProt: P0DMS8

Pathways: Hormone Transport, cAMP Metabolic Process, Regulation of Leukocyte Mediated Immunity, Positive Regulation of Immune Effector Process