G-CSF Kit ELISA

N° du produit ABIN8118914

Kit ELISA G-CSF Humain, Colorimetric test pour la quantification de Humain G-CSF.

Aperçu rapide pour G-CSF Kit ELISA (ABIN8118914)

Antigène: G-CSF (CSF3) (Colony Stimulating Factor 3 (Granulocyte) (CSF3))

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 9.375 ng/mL - 500 ng/mL

Application: ELISA

Type d'échantillon: Plasma, Serum

Détail du produit G-CSF Kit ELISA

Seuil minimal de détection: 9.375 ng/mL

Fonction: granulocyte colony stimulating factor in biological matrices

Analytical Method: Quantitative

Specificité: GCSF

Ingrédients:

• Coated microtiter plate, 96 wells
• (1x8 strips) 1 Calibrator diluent 1.8ml
• Calibrator (1mg/ml) 12μl 20X wash buffer 25ml
• Assay buffer 50ml
• 1000X secondary antibody 1000X detection reagent 17μl TMB 12ml
• TMB stop solution 12ml

Matériel non inclus:

• Precision pipettes calibrated to deliver 5-1000μL
• Multi-channel pipette calibrated to deliver 50-200μL
• Plate shaker
• Disposable tips
• Vortex-Mixe
• Distilled or de-ionized water
• Microplate reader capable of reading 450nm with background subtraction

Information d'application

Indications d'application: Optimal working dilution should be determined by the investigator.

Volume d'échantillon: 15 μL

Durée du test: 2.5 h

Plaque: Pre-coated

Protocole: This assay employs the indirect sandwich enzyme immunoassay technique. Anti-GCSF is coated onto a 96 well microplate. Calibrator and test samples prepared by dilution into assay buffer and are pipetted into the appropriate wells. GCSF present in biological matrices is bound by the immobilized anti- GCSF antibody. After washing away any unbound substances, tagged anti-GCSF secondary antibody is added to the wells. After washing, diluted detection reagent is added to the wells. The plate is washed to remove any unbound antibody-enzyme reagent and a substrate solution is added to the wells for color development. The color development is proportional to the amount of GCSF present in test samples. The color development is stopped and the intensity of the color is measured.

Préparation des réactifs:

Prepare only the appropriate amount of required reagent on the day of use. Store all reagents as per instructions stated on the label. 1. Wash Buffer (1X) Preparation: Dilute wash buffer concentrate with ultra-pure water 1/20 before use (for example add 25 mL concentrate to 475 mL ultrapure water). Mix well. 2. Secondary Antibody (1X) Preparation: Dilute secondary antibody with assay buffer 1/1000 before use (for example add 12 μL to 12 mL of assay buffer). Mix well. 3. Detection Reagent (1X) Preparation: Dilute detection reagent with assay buffer 1/1000 before use (for example add 12 μL concentrate to 12 mL of assay buffer). Mix well. 4. Calibrator Preparation: Dilute the calibrator from 1 mg/mL down to 5 μg/mL by pipetting 5μL of calibrator stock into 995μL assay buffer. Label "Cal. Int." Mix well. Prepare calibrators with concentrations ranging from 500 ng/mL to 9.375 ng/mL. The following is an example calibrator curve.

Prélèvement de l'échantillon: This kit is compatible with EDTA-plasma, heparinplasma and serum samples. Samples can be stored at or below -20 °C for up to 1 year.

Préparation de l'échantillon:

Dilute calibrators and test samples 1/50 with assay buffer (for example add 5μL of prepared calibrator or sample to 245μL of assay buffer). Mix well. Do not store diluted samples.

Calcul des résultats:

1. Construct a standard curve by plotting the absorbance obtained from each standard against concentration. Use a 4 or 5 parameter curve fit. 2. The concentration of the unknowns can be back calculated directly from this standard curve using the absorbance value for each sample. 3. Any sample diluted more or less than the standard series will need additional data correction. For example, if the sample is diluted 1/50, then the concentration will be calculated by dividing by 2 due to the calibrators being 2 times more diluted. Similarly, if the sample is diluted 1/500, then the concentration will be calculated by multiplying by a correction factor of 5 due to the calibrators being 5 times more concentrated.

Précision du teste: < 25% for ULOQ and LLOQ and <20% for the remaining concentrations

Restrictions: For Research Use only

Stockage

Agent conservateur: Without preservative

Stock: -20 °C

Stockage commentaire: -20C, 1 year

Date de péremption: 12 months

Détail du antigène

Antigène: G-CSF (CSF3) (Colony Stimulating Factor 3 (Granulocyte) (CSF3))

Autre désignation: granulocyte colony stimulating factor

Sujet: Granulocyte colony-stimulating factor (G-CSF or GCSF), also known as colony-stimulating factor 3 (CSF 3), is a glycoprotein that stimulates the bone marrow to produce granulocytes and stem cells and release them into the bloodstream

ID gène: 1440

Pathways: Cellular Response to Molecule of Bacterial Origin, Regulation of Actin Filament Polymerization