Tel:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@anticorps-enligne.fr

Vitamin D-Binding Protein Kit ELISA

GC Reactivité: Rat Colorimetric Sandwich ELISA Plasma, Serum
N° du produit ABIN956157
  • Antigène Voir toutes Vitamin D-Binding Protein (GC) Kits ELISA
    Vitamin D-Binding Protein (GC)
    Reactivité
    • 8
    • 4
    • 3
    • 2
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    Rat
    Méthode de détection
    Colorimetric
    Type de méthode
    Sandwich ELISA
    Application
    ELISA
    Type d'échantillon
    Plasma, Serum
    Analytical Method
    Quantitative
    Attributs du produit
    The Rat Gc-Globulin ELISA is based on a solid phase enzyme-linked immunosorbent assay (ELISA). The assay uses an affinity purified anti-rat Gc-Globulin antibody for solid phase (microtiter wells) immobilization and a horseradish peroxidase (HRP) conjugated anti-rat Gc-Globulin antibody for detection. The test sample is diluted into actin containing diluent (converting free Gc-globulin to the actin complexed form) and incubated in the microtiter wells for 45 minutes. The microtiter wells are subsequently washed and HRP conjugate is added and incubated for 45 minutes. This results in Gc-Globulin/actin complexes being sandwiched between the immobilization and detection antibodies. The wells are then washed to remove unbound HRP-labeled antibodies and TMB Reagent is added and incubated for 20 minutes at room temperature, resulting in the development of a blue color. Color development is stopped by the addition of Stop Solution, changing the color to yellow, and optical density is measured spectrophotometrically at 450 nm. The concentration of Gc-globulin is proportional to the optical density of the test sample.
    Ingrédients
    Anti-rat Gc-globulin antibody coated microtiter plate with 96 wells (provided as 12 detachable strips of 8)
    Enzyme Conjugate Reagent, 11 mL
    Calibrator (lyophilized)
    Actin (lyophilized), 3 vials
    10X Diluent (25 mL)
    20X Wash Solution (50 mL)
    TMB Reagent (One-Step), 11 mL
    Stop Solution (1N HCl), 11 mL.
    Matériel non inclus
    Precision pipettes and tips
    Distilled or de-ionized water
    Polypropylene or glass tubes
    Vortex mixer
    Absorbent paper or paper towels
    Micro-Plate incubator/shaker mixing speed of ~150 rpm
    A microtiter plate reader capable of measuring absorbance at 450 nm, with a bandwidth of 10 nm or less and an OD range of 0-4 OD
    Graph paper (PC graphing software is optional)
    Featured
    Discover our best selling GC Kit ELISA
    Top Product
    Discover our top product GC Kit ELISA
  • Plaque
    Pre-coated
    Préparation de l'échantillon

    General Note: Our studies indicate that Gc-globulin is present in normal rat serum at a concentration of ~1 mg/mL. In order to obtain values within the range of the calibration curve we suggest that samples initially be diluted 10,000 fold in actin containing 1X diluent using the following procedure for each sample to be tested:
    1. Dispense 198 µL and 297 µL of actin containing 1X diluent into separate tubes.
    2. Pipette and mix 2 µL of the serum/plasma sample into the tube containing 198 µL of diluent. This provides a 100 fold diluted sample.
    3. Mix 3 µL of the 100 fold diluted sample with the 297 µL of diluent in the second tube. This provides a 10,000 fold dilution of the sample.
    4. Repeat this procedure for each sample to be tested.

    Procédure de l'essai
    1. Secure the desired number of coated wells in the holder.
      2. Dispense 100 µL of calibrators and samples into the wells (we recommend that samples be tested in duplicate).
      3. Incubate on an orbital micro-plate shaker at 100-150 rpm at room temperature (18-25°C) for 45 minutes.
      4. Wash and empty the microtiter wells 5 times with 1X wash solution. This may be performed using either a plate washer (400 µL/well) or with a squirt bottle. The entire wash procedure should be performed as quickly as possible.
      5. Strike the wells sharply onto adsorbent paper or paper towels to remove all residual droplets.
      6. Add 100 µL of enzyme conjugate reagent into each well.
      7. Incubate on an orbital micro-plate shaker at 100-150 rpm at room temperature (18-25°C) for 45 minutes.
      8. Wash as detailed in 4 above.
      9. Strike the wells sharply onto adsorbent paper or paper towels to remove all residual droplets.
      10. Dispense 100 µL of TMB Reagent into each well.
      11. Gently mix on an orbital micro-plate shaker at 100-150 rpm at room temperature (18-25°C) for 20 minutes.
      12. Stop the reaction by adding 100 µL of Stop Solution to each well.
      13. Gently mix. It is important to make sure that all the blue color changes to yellow.
      14. Read the optical density at 450 nm with a microtiter plate reader within 5 minutes.
    Calcul des résultats
    1. Calculate the average absorbance values (A450) for each set of reference calibrators, and samples.
      2. Construct a calibration curve by plotting the mean absorbance obtained from each reference calibrator against its concentration in ng/mL on linear graph paper, with absorbance values on the vertical or Y-axis and concentration on the horizontal or X-axis.
      3. Using the mean absorbance value for each sample, determine the corresponding concentration of Gc-globulin in ng/mL from the calibration curve.
      4. Multiply the derived concentration by the dilution factor to determine the actual concentration of Gc-globulin in the serum/plasma sample.
      5. If available, PC graphing software may be used for the above steps.
      6. If the OD450 values of samples fall outside of the calibration curve when tested at a dilution of 10,000, samples should be diluted appropriately and re-tested.
    Restrictions
    For Research Use only
  • Stock
    -20 °C
    Stockage commentaire
    Lyophilized actin should be stored at or below -20°C. The remainder of the kit should be stored at 4°C and the microtiter plate should be kept in a sealed bag with desiccant to minimize exposure to damp air. Test kits will remain stable until the expiration date provided that the components are stored as described above.
    Date de péremption
    The expiry date is stated on the label.
  • Antigène Voir toutes Vitamin D-Binding Protein (GC) Kits ELISA
    Vitamin D-Binding Protein (GC)
    Autre désignation
    Gc-Globulin (GC Produits)
    Synonymes
    DBP Kit ELISA, DBP/GC Kit ELISA, GRD3 Kit ELISA, VDBG Kit ELISA, VDBP Kit ELISA, zgc:110389 Kit ELISA, zgc:92753 Kit ELISA, GC Kit ELISA, Gc Kit ELISA, DBP02 Kit ELISA, VDB Kit ELISA, Vdbp Kit ELISA, VTDB Kit ELISA, gc Kit ELISA, GC, vitamin D binding protein Kit ELISA, D-box binding PAR bZIP transcription factor Kit ELISA, D site albumin promoter binding protein Kit ELISA, group-specific component (vitamin D binding protein) Kit ELISA, group specific component Kit ELISA, group-specific component (vitamin D binding protein) S homeolog Kit ELISA, GC Kit ELISA, Dbp Kit ELISA, gc Kit ELISA, Gc Kit ELISA, gc.S Kit ELISA
    Sujet
    Gc-globulin, also known as vitamin D-binding protein, is an acute phase protein that is synthesized in the liver and serves as an actin scavenger in blood. It has recently been identified as a potentially useful early marker of liver toxicity and is reportedly useful as an indicator of skeletal muscle injury.
    Pathways
    Metabolism of Steroid Hormones and Vitamin D, Monocarboxylic Acid Catabolic Process
Vous êtes ici:
Support technique