Tel:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@anticorps-enligne.fr

IL1A Kit ELISA

IL1A Reactivité: Humain Colorimetric Sandwich ELISA 4.7-300 pg/mL Cell Culture Supernatant, Serum, Tissue Lysate
N° du produit ABIN1112637
  • Antigène Voir toutes IL1A Kits ELISA
    IL1A (Interleukin 1 alpha (IL1A))
    Reactivité
    • 8
    • 7
    • 5
    • 4
    • 3
    • 3
    • 3
    • 3
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    Humain
    Méthode de détection
    Colorimetric
    Type de méthode
    Sandwich ELISA
    Gamme de detection
    4.7-300 pg/mL
    Seuil minimal de détection
    4.7 pg/mL
    Application
    ELISA
    Fonction
    For quantitative detection of IL-1? in Human serum, body fluids, tissue lysates or cell culture supernates.
    Type d'échantillon
    Cell Culture Supernatant, Serum, Tissue Lysate
    Analytical Method
    Quantitative
    Sensibilité
    < 0.5 pg/mL
    Ingrédients
    1. One 96-well plate pre-coated with anti-Human IL-1alpha antibody 2. Lyophilized Human IL-1alpha standards: 2 tubes (10ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-Human IL-1alpha antibody (Concentrated): 130 µl.
    Matériel non inclus
    1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L
    Featured
    Discover our best selling IL1A Kit ELISA
    Top Product
    Discover our top product IL1A Kit ELISA
  • Commentaires

    This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-IL-1? polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-IL-1? polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the IL-1? amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of IL-1? can be calculated.

    Plaque
    Pre-coated
    Préparation des réactifs
    1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.
    Préparation de l'échantillon

    Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
    Body fluids, tissue lysate and cell culture supernate: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C° C.
    Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 2000 × g for 15 min. Analyze the serum immediately or aliquot and store at -20 °C . Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP. 3. Not suitable for serum which is haemolytic or with high fat.

    Restrictions
    For Research Use only
  • Agent conservateur
    Sodium azide, Thimerosal (Merthiolate)
  • Antigène Voir toutes IL1A Kits ELISA
    IL1A (Interleukin 1 alpha (IL1A))
    Autre désignation
    IL-1alpha (IL1A Produits)
    Synonymes
    IL-1A Kit ELISA, IL1 Kit ELISA, IL1-ALPHA Kit ELISA, IL1F1 Kit ELISA, IL-6 Kit ELISA, Il-1a Kit ELISA, IL-1 alpha Kit ELISA, IL-1alpha Kit ELISA, L1A Kit ELISA, interleukin 1 alpha Kit ELISA, interleukin 6 Kit ELISA, IL1A Kit ELISA, IL6 Kit ELISA, Il1a Kit ELISA
    Sujet
    Interleukin-1 alpha (IL-1Į) is a protein of the interleukin-1 family that in humans is encoded by the IL1A gene which spans 10.2 kb and has 7 exons. It is 1 of 2 structurally distinct forms of IL1, the other being IL1B, this two proteins are synthesized by a variety of cell types, including activated macrophages, keratinocytes, stimulated B lymphocytes, and fibroblasts, and are potent mediators of inflammation and immunity. IL1A may play a role in the genesis of inflammation by augmenting the transcription of proinflammatory genes, a mechanism not affected by extracellular inhibitors. IL1A has been administered to patients during receiving autologous bone marrow transplantation.
    Pathways
    Signalisation NF-kappaB, Autophagy, Cancer Immune Checkpoints
Vous êtes ici:
Support technique