Leptin Receptor Kit ELISA

N° du produit ABIN3198464

Détail du produit Leptin Receptor Kit ELISA

Antigène: Leptin Receptor (LEPR)

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 62.50-4000 pg/mL

Seuil minimal de détection: 62.50 pg/mL

Application: ELISA

Fonction: This assay employs the quantitative sandwich enzyme immunoassay technique for quantitative detection.

Type d'échantillon: Cell Culture Supernatant, Plasma, Serum

Analytical Method: Quantitative

Specificité: Leptin R, Human

Sensibilité: 3.26 pg/mL

Ingrédients: Plate, Standard, Diluent

Matériel non inclus: Microplate reader capable of measuring absorbance at 450 nm, with correction wavelength set at 570 nm or 630 nm.
Pipettes and pipette tips.
50 μL to 300 μL adjustable multichannel micropipette with disposable tips.
Multichannel micropipette reservoir.
Beakers, flasks, cylinders necessary for preparation of reagents.
Deionized or distilled water.
Polypropylene test tubes for dilution.

Information d'application

Volume d'échantillon: 100 μL

Durée du test: 3 - 4 h

Plaque: Pre-coated

Restrictions: For Research Use only

Stockage

Buffer: Buffer contains: 0.02 % sodium azide

Agent conservateur: Sodium azide

Précaution d'utilisation: This product contains Sodium azide: a POISONOUS AND HAZARDOUS SUBSTANCE which should be handled by trained staff only.

Conseil sur la manipulation: Intended for research use only and are not for use in diagnostic or therapeutic procedures.
Treat all chemicals with caution because they can be potentially hazardous.
It is recommended that this product is handled only by persons who have been trained in laboratory techniques and in accordance with the principles of good laboratory practice. Wear personal protection equipment such as laboratory coat, safety glasses and gloves.
Avoid direct contact with skin or eyes. Wash immediately with water in the case of contact with skin or eyes. Avoid contact of skin or mucous membranes with kit reagents or specimens. See material safety data sheet(s) for specific advice.
Pure water or deionized water must be used for reagent preparation.
The Stop Solution provided with this kit is an acid solution. Wear personal protection equipment with caution.
Do not expose kit reagents to strong light during storage and incubation.
Rubber or disposable latex gloves should be worn while handling kit reagents or specimens.
Avoid contact of substrate solution with oxidizing agents and metal.
Avoid splashing or generation of aerosols.
Use disposable pipette tips and/or pipettes to avoid microbial or cross-contamination of reagents or specimens which may invalidate the test.
Use clean, dedicated reagent trays for dispensing the conjugate and substrate reagent.
Exposure to acid inactivates the HRP and antibody conjugate.
Substrate solution must be warmed to room temperature prior to use.
Decontaminate and dispose specimens and all potentially contaminated materials as they could contain infectious agents. The preferred method of decontamination is autoclaving for a minimum of 1 hour at 121.5 °C.
Liquid wastes not containing acid and neutralized waste may be mixed with sodium hypochlorite in volumes such that the final mixture contains 1.0 % sodium hypochlorite. Allow 30 minutes for effective decontamination. Liquid waste containing acid must be neutralized prior to the addition of sodium hypochlorite.
All reagents including microplate, samples, standards and working solution should be warmed to room temperature before use.
To obtain accurate results, using adhesive film to seal the plate during incubation is suggested.
It is recommended that all samples and standards be assayed in duplicate.
Avoid foaming when mixing or reconstituting solutions containing protein.
To avoid cross-contamination, use separate reservoirs for each reagent and change pipette tips between each standard, sample and reagent.
When using an automated plate washer, adding a 30 seconds soak period before washing step and/or rotating the plate between wash steps may improve assay precision.
When pipetting reagents, maintain a consistent order of addition from well-to-well.
Keep Substrate solution protected from direct strong light. Substrate Solution should turn to gradations of blue after a proper color development.
Read absorbance within 30 minutes after adding stop solution.
Take care not to scratch the inner surface of the microwells.

Stock: 4 °C

Stockage commentaire: Store kit reagents between 2 and 8 °C. Immediately after use remaining reagents should be returned to cold storage (2 to 8 °C).
Expiry of the kit and reagents is stated on labels. Expiration date of the kit components can only be guaranteed if the components are stored properly, and if, in case of repeated use of one component, this reagent is not contaminated by the first handling.
Unopened Kit: Store at 2 - 8 °C (See expiration date on the label).
Opened/Reconstituted Reagents: Up to 1 month at 2 - 8 °C.
Reconstituted Standard: Up to 1 month at ≤ -20 °C in a manual defrost freezer. Avoid repeated freeze-thaw cycles.
Microplate Wells: Up to 1 month at 2 - 8 °C. Return unused strips to the foil pouch containing the desiccant pack, reseal along entire edge to maintain plate integrity. Provided this is within the expiration date of the kit

Détail du antigène

Antigène: Leptin Receptor (LEPR)

Autre désignation: Leptin R (LEPR Produits)

Synonymes: CD295 Kit ELISA, LEP-R Kit ELISA, LEPRD Kit ELISA, OB-R Kit ELISA, OBR Kit ELISA, obr Kit ELISA, cd295 Kit ELISA, ob-rb Kit ELISA, Fa Kit ELISA, LEPROT Kit ELISA, Leprb Kit ELISA, Modb1 Kit ELISA, OB-RGRP Kit ELISA, Obr Kit ELISA, db Kit ELISA, diabetes Kit ELISA, obese-like Kit ELISA, obl Kit ELISA, ObRb Kit ELISA, Ob-R Kit ELISA, Ob-RM Kit ELISA, lepr Kit ELISA, leptin receptor Kit ELISA, leptin receptor S homeolog Kit ELISA, LEPR Kit ELISA, lepr Kit ELISA, Lepr Kit ELISA, lepr.S Kit ELISA

Sujet: Leptin receptor (Leptin R) also known as OB-R or CD295 is a protein that in humans is encoded by the LEPR gene. It functions as a receptor for the fat cell-specific hormone leptin.

ID gène: 3953

NCBI Accession: NM_001003679

UniProt: P48357

Pathways: Signalistation JAK/STAT, AMPK Signaling, Feeding Behaviour