Angiopoietin 2 Kit ELISA

N° du produit ABIN1112556

Détail du produit Angiopoietin 2 Kit ELISA

Antigène: Angiopoietin 2 (ANGPT2)

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 8-150 pg/mL

Seuil minimal de détection: 8 pg/mL

Application: ELISA

Fonction: For quantitative detection of ANG? in Human serum, plasma, urine, cell culture supernatant or tissue samples.

Type d'échantillon: Serum, Plasma, Urine, Tissue Samples, Cell Culture Supernatant

Analytical Method: Quantitative

Ingrédients: 1. One 96-well plate pre-coated with anti-human ANG2 antibody 2. Standard: 0.5ml (180pg /mL) 3. Standard diluent buffer: 1.5 ml 4. Wash buffer (30x): 20 ml.

Matériel non inclus: 1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L

Information d'application

Commentaires:

This kit was based on standard sandwich enzyme-linked immune-sorbent assay technology. The purified anti-ANG?antibody was pre-coated onto 96-well plates. And the HRP conjugated anti-ANG ? antibody was used as detection antibodies. The standards test samples and HRP conjugated detection antibody were added to the wells subsequently mixed and incubated then unbound conjugates were washed away with wash buffer. TMB substrates (A & B) were used to visualize HRP enzymatic reaction. TMB was catalyzed by HRP to produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional to the ANG? amount of sample captured in plate. Read the O.D. absorbance at 450nm in a microplate reader and then the concentration of ANG? can be calculated.

Plaque: Pre-coated

Préparation des réactifs:

1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.

Préparation de l'échantillon:

Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles. Serum: Coagulate at room temperature for 10-20 °C min, then, centrifuge at the speed of 2000-3000 r.p.m. for 20 min to collect supernatant. If precipitation appeared, centrifuge again. Plasma: Collect plasma using EDTA or citrate plasma as an anticoagulant, and mix for 10-20 °C min, centrifuge at the speed of 2000-3000 r.p.m. for 20 min of collection. If precipitation appeared, centrifuge again. Urine: Collect urine using a sterile container, centrifuge at the speed of 2000-3000 r.p.m. for 20 min to collect supernatant. If precipitation appeared, centrifuge again. For collection of hydrothorax and cerebrospinal fluid, take reference to this operation. Cell culture supernatant: For secretory components: use a sterile container to collect. Centrifuge at the speed of 2000-3000 r.p.m. for 20 min to collect supernatant. For intracellular components: Dilute cell suspension with PBS(pH7.2-7.4) to make the cell concentration reached 1 million / ml. Damage cells and release of intracellular components through repeated freeze-thaw cycles. Centrifuge at the speed of 2000-3000 r.p.m. For 20 min to collect supernatant. If precipitation appeared, centrifuge again. Tissue samples: Cut samples and weight, add certain volume of PBS (pH7.4), rapidly frozen with liquid nitrogen. After melting, store samples at 2-8 ℃ . Add certain volume of PBS (pH7.4), homogenize thoroughly, centrifuge at the speed of 2000-3000 r.p.m. for 20 min to collect supernatant. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN 3 can not be used as test sample preservative, since it is the inhibitor for HRP. 3. After collecting samples, analyze immediately or aliquot and store frozen at -20 °C. Avoid repeated freeze-thaw cycles. 2. Wash buffer Dilute concentrated Wash buffer (Kit Component 4) 30-fold (1:30) with distilled water (i.e. add 20 ml of concentrated wash buffer into 580 ml of distilled water). 3. Standard Reconstitution of the Lyophilized Human ANG II standard (Kit Component 2): standard solution should be prepared no more than 2 hours prior to the experiment. Two tubes of standard are included in each kit. Use one tube for each experiment. (Note: Do not dilute the standard directly in the plate) a. 150 pg/ml of standard solution: Add 0.5 ml of the 180pg/ml standard (Kit Component 2) into 0.1 ml Standard diluent buffer (Kit Component 3) and mix thoroughly. b. 75 pg/ml -> 9.4 pg/ml of standard solutions: Label 4 Eppendorf tubes with75pg/ml, 37.5pg/ml, 18.8 pg/ml, 9.4pg/ml, respectively. Aliquot 0.2 ml of the Standard diluent buffer (Kit Component 3) into each tube. Add 0.2 ml of the above 150 pg/ml standard solution into 1st tube and mix thoroughly. Transfer 0.2 ml from 1st tube to 2nd tube and mix thoroughly. Transfer 0.2 ml from 2nd tube to 3rd tube and mix thoroughly, and so on. Chongqing Biospes Co., Ltd Product Manual

Restrictions: For Research Use only

Stockage

Agent conservateur: Sodium azide, Thimerosal (Merthiolate)

Détail du antigène

Antigène: Angiopoietin 2 (ANGPT2)

Autre désignation: Angiopoietin-2 (ANGPT2 Produits)

Synonymes: AGPT2 Kit ELISA, ANG2 Kit ELISA, Agpt2 Kit ELISA, Ang-2 Kit ELISA, Ang2 Kit ELISA, ang2 Kit ELISA, angpt2 Kit ELISA, ANGIOPOIETIN-2 Kit ELISA, ANG-2 Kit ELISA, ANGPT2 Kit ELISA, Angrp Kit ELISA, Rnase5b Kit ELISA, ANG3 Kit ELISA, C11orf2 Kit ELISA, C11orf3 Kit ELISA, FFR Kit ELISA, angiopoietin 2 Kit ELISA, angiopoietin 2b Kit ELISA, angiogenin, ribonuclease A family, member 2 Kit ELISA, VPS51, GARP complex subunit Kit ELISA, ANGPT2 Kit ELISA, Angpt2 Kit ELISA, angpt2b Kit ELISA, Ang2 Kit ELISA, VPS51 Kit ELISA

Sujet: Angiopoietins are protein growth factors that promote angiogenesis, the formation of blood vessels from pre-existing blood vessels. All angiopoietins bind with similar affinity to an endothelial cell-specific tyrosine-protein kinase receptor. ANG Ⅱ is a naturally occurring antagonist of angiopoietin-1 (ANGPT1) that competes for binding to the TIE2 receptor and blocks ANGPT1-induced TIE2 autophosphorylation during vasculogenesis. ANG Ⅱ is a mediator of epithelial necrosis with an important role in hyperoxic acute lung injury and pulmonary edema. It plays a critical role in inducing tumor cell infiltration, and that this invasive phenotype is caused by activation of MMP2.

Pathways: Signalisation RTK