Tel:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@anticorps-enligne.fr

ERBB3 Kit ELISA

ERBB3 Reactivité: Humain pTyr Colorimetric Sandwich ELISA Cell Lysate, Tissue Lysate
N° du produit ABIN1981720
  • Antigène Voir toutes ERBB3 Kits ELISA
    ERBB3 (Receptor Tyrosine-Protein Kinase ErbB-3 (ERBB3))
    Épitope
    pTyr
    Reactivité
    • 9
    • 3
    • 2
    • 2
    Humain
    Méthode de détection
    Colorimetric
    Type de méthode
    Sandwich ELISA
    Application
    ELISA
    Fonction
    Human Phosphotyrosine Erb-B3 ELISA Kit. This assay semi-quantitatively measures phosphotyrosine Erb-B3 in lysate samples.
    Type d'échantillon
    Cell Lysate, Tissue Lysate
    Analytical Method
    Semi-Quantitative
    Specificité
    The antibody pair provided in this kit recognizes Human Tyrosine-Phosphorylated-Erb-B3.
    Attributs du produit
    • Rapidly measure phosphorylated protein in lysates
    • Screen numerous different cell lysates without performing a Western Blot analysis
    • Minimal hands-on time, convenient, and non-radioactive material
    Ingrédients
    • Pre-Coated 96-well Strip Microplate
    • Wash Buffer
    • Biotinylated Anti-Phosphotyrosine Antibody
    • Stop Solution
    • Assay Diluent(s)
    • Positive Control Sample
    • Lysis Buffer
    • Streptavidin-Conjugated HRP
    • TMB One-Step Substrate
    Matériel non inclus
    • Distilled or deionized water
    • 100 mL and 1 liter graduated cylinders
    • Tubes to prepare sample dilutions
    • Protease and Phosphatase inhibitors
    • Precision pipettes to deliver 2 μL to 1 mL volumes
    • Adjustable 1-25 mL pipettes for reagent preparation
    • Benchtop rocker or shaker
    • Microplate reader capable of measuring absorbance at 450 nm
    Featured
    Discover our best selling ERBB3 Kit ELISA
  • Volume d'échantillon
    100 μL
    Plaque
    Pre-coated
    Protocole
    1. Prepare all reagents and samples as instructed in the manual.
    2. Add 100 μL of sample or positive control to each well.
    3. Incubate 2.5 h at RT or O/N at 4 °C.
    4. Add 100 μL of prepared primary antibody to each well.
    5. Incubate 1 h at RT.
    6. Add 100 μL of prepared 1X HRP-Streptavidin to each well.
    7. Incubate 1 h at RT.
    8. Add 100 μL of TMB One-Step Substrate Reagent to each well.
    9. Incubate 30 min at RT.
    10. Add 50 μL of Stop Solution to each well.
    11. Read at 450 nm immediately.
    Préparation des réactifs
    1. Bring all reagents and samples to room temperature (18 - 25 °C) before use.
      2. Item E, Assay Diluent should be diluted 5-fold with deionized or distilled water before use.
      3. Preparation of Positive Control: Briefly spin the Positive Control vial of Item K. Add 400 µL 1x Assay Diluent (Item E, Assay Diluent should be diluted 5-fold with deionized or distilled water before use) into Item K vial to prepare P-1 (See i. Positive control of part IX.for a typical result). Dissolve the powder thoroughly by a gentle mix. Pipette 300 µL 1x Assay Diluent into each tube. Transfer 150 µL prepared P-1 into a tube with 300 µL 1x Asaay Diluent to produce a dilution series (shown below). Mix each tube thoroughly before the next transfer. 1x Assay Diluent serves as the background. Phospho-ErbB3 ELISA 6
      4. If the Wash Concentrate (20x) (Item B) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 mL of Wash Buffer Concentrate into deionized or distilled water to yield 400 mL of 1x Wash Buffer.
      5. Briefly spin the biotinylated antibody (Item C) before use. Add 100 µL of 1x Assay Diluent into the vial to prepare a biotinylated anti-phosphotyrosine antibody concentrate. Pipette up and down to mix gently (the concentrate can be stored at 4 °C for 5 days or at -80 °C for one month). The biotinylated phosphotyrosine antibody should be diluted with 1x Assay Diuent and used in step 4 of Part VII Assay Procedure.
      6. Briefly spin the HRP-Streptavidin concentrate vial (Item G) and pipette up and down to mix gently before use. HRP-Streptavidin concentrate should be diluted 600 fold with 1x Assay Diluent. For example: Briefly spin the vial (Item G) and pipette up and down to mix gently . Add 20 µL of HRP-Streptavidin concentrate into a tube with 12 mL 1x Assay Diluent to prepare a 600-fold diluted HRP-Streptavidin solution (don't store the diluted solution for next P-1 P-2 P-3 P-4 P-5 0 150 µL Positive Control 400 µL 1x Assay Diluent 150µl 150 µL 150 µL Phospho-ErbB3 ELISA 7 day use). Mix well.
      7. Cell Lysate Buffer should be diluted 2-fold with deionized or distilled water before use (recommend to add protease and phosphatase inhibitors). VII.
    Préparation de l'échantillon

    Cell lysates - Rinse cells with PBS, making sure to remove any remaining PBS before adding the lysis buffer. Solubilize cells at 4 x 107 cells/mL in 1x Lysis Buffer (we recommend adding protease and phosphatase inhibitors to lysis buffer prior to sample preparation). Pipette up and down to resuspend and incubate the lysates with shaking at 2 - 8° C for 30 minutes. Microcentrifuge at 13,000 rpm for 10 minutes at 2 - 8° C, and transfer the supernates into a clean test tube. Lysates should be used immediately or aliquoted and stored at -70 °C. Avoid repeated freeze-thaw cycles. Thawed lysates should be kept on ice prior to use.
    For the initial experiment, we recommend to do a serial dilution testing such as 5-fold and 100-fold dilution for your cell lysates with Assay Diluent (Item E) before use.
    Note: The fold dilution of sample used depends on the abundance of phosphorylated proteins and should be determined empiricallys. Phospho-ErbB3 ELISA 5 More of the sample can be used if signals are too weak. If signals are too strong, the sample can be diluted further.
    Cell lysate buffer should be diluted 2-fold with deionized or distilled water before use (recommend to add protease and phosphatase inhibitors).

    Procédure de l'essai
    1. Bring all reagents to room temperature (18 - 25 °C) before use. It is recommended that all samples or Positive Control should be run at least in duplicate.
      2. Add 100 µL of each sample or positive control into appropriate wells. Cover well with plate holder and incubate for 2.5 hours at room temperature or over night at 4 °C with shaking.
      3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 µL) using a multi-channel pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
      4. Add 100 µL of prepared 1X biotinylated anti-phosphotyrosine antibody (Reagent Preparation step 5) to each well. Incubate for 1 hour at room temperature with shaking.
      5. Discard the solution. Repeat the wash as in step3. Phospho-ErbB3 ELISA 8
      6. Add 100 µL of prepared 1X HRP-Streptavidin solution (see Reagent Preparation step 6) to each well. Incubate for 45 minutes at room temperature with shaking.
      7. Discard the solution. Repeat the wash as in step3.
      8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with shaking.
      9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.
    Calcul des résultats

    ELISA data analysis: Average the duplicate readings for each sample or positive control then subtract the average blank optical density.
    i. Positive Control A431 cells were treated with recombinant human EGF at 37 °C for 10 min. Solubilize cells at 4 x 107 cells/mL in lysis buffer. Serial dilutions of lysates were analyzed in this ELISA. Please see step 3 of Part VI Reagent Preparation for detail. 0 0.5 1 1.5 2 OD =4 50 n m P-1 P-2 P-3 P-4 P-5 Positive control dilution series Assay Diluent Phospho-ErbB3 ELISA 10
    ii. Recombinant Human EGF Stimulation of A431 Cell Lines A431 cells were treated or untreated with 100 ng/mL recombinant human EGF for 10 min. Cell lysates were analyzed using this phosphoELISA: 0 1 2 3 Untreated EGF treated OD = 4 50 n m Phospho-ErbB3 ELISA 11 X

    Restrictions
    For Research Use only
  • Conseil sur la manipulation
    Avoid repeated freeze- thaw cycles.
    Stock
    -20 °C
    Stockage commentaire
    Upon receipt, the kit should be stored at -20 °C. Please use within 6 months from the date of shipment. After initial use, Wash Buffer Concentrate (Item B), Assay Diluent (Item E), TMB One-Step Substrate Reagent (Item H), HRP-Streptavidin (Item G), Stop Solution (Item I) and Cell Lysate Buffer (Item J) should be stored at 4 °C to avoid repeated freeze-thaw cycles. Return unused wells to the pouch containing desiccant pack, reseal along entire edge and store at -20 °C. Reconstituted Positive Control (Item K) should be stored at -70 °C.
    Date de péremption
    6 months
  • Antigène Voir toutes ERBB3 Kits ELISA
    ERBB3 (Receptor Tyrosine-Protein Kinase ErbB-3 (ERBB3))
    Autre désignation
    ErbB3 (ERBB3 Produits)
    Synonymes
    ErbB-3 Kit ELISA, HER3 Kit ELISA, LCCS2 Kit ELISA, MDA-BF-1 Kit ELISA, c-erbB-3 Kit ELISA, c-erbB3 Kit ELISA, erbB3-S Kit ELISA, p180-ErbB3 Kit ELISA, p45-sErbB3 Kit ELISA, p85-sErbB3 Kit ELISA, ERBB3 Kit ELISA, C76256 Kit ELISA, Erbb-3 Kit ELISA, Erbb3r Kit ELISA, Her3 Kit ELISA, nuc-ErbB3 Kit ELISA, erb-b2 receptor tyrosine kinase 3 Kit ELISA, v-erb-b2 erythroblastic leukemia viral oncogene homolog 3 (avian) Kit ELISA, ERBB3 Kit ELISA, Erbb3 Kit ELISA
    ID gène
    2065
    UniProt
    P21860
    Pathways
    Signalisation RTK, Fc-epsilon Receptor Signaling Pathway, EGFR Signaling Pathway, Neurotrophin Signaling Pathway
Vous êtes ici:
Support technique