Insulin Receptor Kit ELISA

N° du produit ABIN2948537

Kit ELISA Insulin Receptor Humain, Colorimetric test pour la quantification de Humain Insulin Receptor.

Aperçu rapide pour Insulin Receptor Kit ELISA (ABIN2948537)

Antigène: Insulin Receptor (INSR)

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 0.78 ng/mL - 50 ng/mL

Application: ELISA

Type d'échantillon: Plasma, Serum

Détail du produit Insulin Receptor Kit ELISA

Seuil minimal de détection: 0.78 ng/mL

Analytical Method: Quantitative

Sensibilité: 0.468 ng/mL

Ingrédients: The kit components listed are for reference only. The product manual may differ slightly. The product should be used as stated on the product manual included and delivered together with the product.

• Pre-coated 96-Well Microplate
• Standard
• Standard Diluent Buffer
• Wash Buffer
• Detection Reagent A
• Detection Reagent B
• Diluent A
• Diluent B
• TMB Substrate
• Stop Solution
• Plate Sealer

Matériel non inclus:

• 37 °C incubator
• Multi and single channel pipettes and sterile pipette tips
• Squirt bottle or automated microplate washer
• 1.5 mL tubes
• Distilled water
• Absorbent filter papers
• 100 mL and 1 liter graduated cylinders
• Microplate reader (wavelength: 450 nm)
• ELISA Shaker

Information d'application

Plaque: Pre-coated

Procédure de l'essai:

This procedure is provided for reference only. The product manual may differ slightly. The product should be used as stated on the product manual included and delivered together with the product.

• 1) Set standard, test samples and control wells.

• 2) Aliquot 100 μL of diluted standard into the standard wells.

• 3) Aliquot 100 μL of Standard Diluent buffer into control (zero) well.

• 4) Aliquot 100 μL of diluted samples into the sample wells. Incubate for 1 hr at 37 °C.

• 5) Aliquot 100 μL of Detection Reagent A to each well. Incubate for 1 hr at 37 °C.

• 6) Wash 3 times.

• 7) Aliquot 100 μL of Detection Reagent B to each well. Incubate for 30 mins at 37 °C.

• 8) Wash 5 times.

• 9) Aliquot 90 μL of TMB Substrate to each well. Incubate for 10-20 mins at 37 °C.

• 10) Aliquot 50 μL of Stop Solution.

• 11) Measure the OD at 450 nm.

Précision du teste: Intra-assay Precision (Precision within an assay): 3 samples with low, medium and high levels of Insulin Receptor (INSR) were tested 20 times on one plate, respectively.

Inter-assay Precision (Precision between assays): 3 samples with low, medium and high levels of Insulin Receptor (INSR) were tested on 3 different plates, 8 replicates in each plate.

CV (%) = (Standard Deviation / mean) x 100

Intra-Assay: CV<10%

Inter-Assay: CV<10%

Restrictions: For Research Use only

Stockage

Stock: 4 °C

Stockage commentaire: Shipped at 4 °C. Upon receipt, store the kit according to the storage instruction in the kit's manual.The stability of the kit is determined by the rate of activity loss. The loss rate is less than 5% within the expiration date under appropriate storage conditions. To minimize performance fluctuations, operation procedures and lab conditions should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same user throughout.

Date de péremption: 6 months

Détail du antigène

Antigène: Insulin Receptor (INSR)

Autre désignation: Insulin Receptor

Pathways: Signalisation NF-kappaB, Signalisation RTK, AMPK Signaling, Carbohydrate Homeostasis, Regulation of Cell Size, Regulation of Carbohydrate Metabolic Process, Growth Factor Binding, Negative Regulation of Transporter Activity