Tel:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@anticorps-enligne.fr

PARP1 Kit ELISA

PARP1 Reactivité: Humain Colorimetric Sandwich ELISA 15.6 pg/mL - 1000 pg/mL Cell Lysate, Plasma, Serum, Tissue Homogenate
N° du produit ABIN6974690
  • Antigène Voir toutes PARP1 Kits ELISA
    PARP1 (Poly (ADP-Ribose) Polymerase 1 (PARP1))
    Reactivité
    • 5
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Humain
    Méthode de détection
    Colorimetric
    Type de méthode
    Sandwich ELISA
    Gamme de detection
    15.6 pg/mL - 1000 pg/mL
    Seuil minimal de détection
    15.6 pg/mL
    Application
    ELISA
    Fonction
    For the quantitative determination of human poly ADP ribose polymerase (PARP) concentrations in serum, plasma, tissue homogenates, cell lysates.
    Type d'échantillon
    Cell Lysate, Plasma, Serum, Tissue Homogenate
    Analytical Method
    Quantitative
    Specificité
    This assay has high sensitivity and excellent specificity for detection of human PARP. No significant cross-reactivity or interference between human PARP and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross-reactivity detection between human PARP and all the analogues, therefore, cross reaction may still exist.
    Sensibilité
    3.9 pg/mL
    Ingrédients
    • Assay plate
    • Standard
    • HRP-avidin (100 x concentrate)
    • Biotin-antibody (100 x concentrate)
    • Sample Diluent
    • HRP-avidin Diluent
    • Biotin-antibody Diluent
    • Wash Buffer (25 x concentrate)
    • TMB Substrate
    • Stop Solution
    • Adhesive Strip
    Top Product
    Discover our top product PARP1 Kit ELISA
  • Indications d'application
    Optimal working dilution should be determined by the investigator.
    Volume d'échantillon
    100 μL
    Durée du test
    1 - 4.5 h
    Plaque
    Pre-coated
    Protocole
    1. Prepare reagents, samples and standards as instructed.
    2. Add 100 µL standard or sample to each well. Incubate 2 hours at 37 °C.
    3. Remove the liquid of each well, don't wash.
    4. Add 100 µL Biotin-antibody (1x) to each well. Incubate 1 hour at 37 °C.
    5. Aspirate and wash 3 times.
    6. Add 100 µL HRP-avidin (1x) to each well. Incubate 1 hour at 37 °C
    7. Aspirate and wash 5 times.
    8. Add 90 μL of TMB Substrate to each well. Incubate for 15-30 minutes at 37 °C. Protect from light.
    9. Add 50 µL Stop Solution to each well. Read at 450 nm within 5 minutes.
    Préparation des réactifs
    1. Biotin-antibody (1x) - Centrifuge the vial before opening. Biotin-antibody requires a 100-fold dilution. A suggested 100-fold dilution is 10 μL of Biotin-antibody + 990 μL of Biotin-antibody Diluent.
    2. HRP-avidin (1x) - Centrifuge the vial before opening. HRP-avidin requires a 100-fold dilution. A suggested 100-fold dilution is 10 μL of HRP-avidin + 990 μL of HRP-avidin Diluent.
    3. Wash Buffer (1x) - If crystals have formed in the concentrate, warm up to room temperature and mix gently until the crystals have completely dissolved. Dilute 20 mL of Wash Buffer Concentrate (25 x) into deionized or distilled water to prepare 500 mL of Wash Buffer (1 x).
    4. Standard Centrifuge the standard vial at 6000-10000rpm for 30s. Reconstitute the Standard with 1.0 mL of Sample Diluent. Do not substitute other diluents. This reconstitution produces a stock solution of 1000 pg/mL. Mix the standard to ensure complete reconstitution and allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making dilutions. Pipette 250 μL of Sample Diluent into each tube (S0-S6). Use the stock solution to produce a 2-fold dilution series (below). Mix each tube thoroughly before the next transfer. The undiluted Standard serves as the high standard (1000 pg/mL). Sample Diluent serves as the zero standard (0 pg/mL).
    Note:
    • Kindly use graduated containers to prepare the reagent. Please don't prepare the reagent directly in the Diluent vials provided in the kit.
    • Bring all reagents to room temperature (18-25 °C) before use for 30 min.
    • Prepare fresh standard for each assay. Use within 4 hours and discard after use.
    • Making serial dilution in the wells directly is not permitted.
    • Please carefully reconstitute Standards according to the instruction, and avoid foaming and mix gently until the crystals have completely dissolved. To minimize imprecision caused by pipetting, use small volumes and ensure that pipettors are calibrated. It is recommended to suck more than 10 μL for once pipetting.
    • Distilled water is recommended to be used to make the preparation for reagents or samples. Contaminated water or container for reagent preparation will influence the detection result.
    Préparation de l'échantillon
    • It is recommended to use fresh samples without long storage, otherwise protein degradation and denaturationmay occur in these samples, leading to false results. Samples should therefore be stored for a short periodat 2 - 8 °C or aliquoted at -20 °C (≤1 month) or -80 °C (≤ 3 months). Repeated freeze-thawcycles should be avoided. Prior to assay, the frozen samples should be slowly thawed and centrifuged toremove precipitates.
    • If the sample type is not specified in the instructions, a preliminary test is necessary to determinecompatibility with the kit.
    • If a lysis buffer is used to prepare tissue homogenates or cell culture supernatant, there is a possibilityof causing a deviation due to the introduced chemical substance.The recommended dilution factor is for reference only.
    • Please estimate the concentration of the samples before performing the test. If the values are not in therange of the standard curve, the optimal sample dilution for the particular experiment has to be determined.Samples should then be diluted with PBS (pH =7.0-7.2).
    Précision du teste
    Intra-assay Precision (Precision within an assay): CV%<8% Three samples of known concentration were tested twenty times on one plate to assess.
    Inter-assay Precision (Precision between assays): CV%<10% Three samples of known concentration were tested in twenty assays to assess.
    Restrictions
    For Research Use only
  • Stock
    4 °C,-20 °C
    Stockage commentaire
    Unopened kit Store at 2 - 8°C. Do not use the kit beyond the expiration date. May be stored for up to 1 month at 2 - 8°C. Coated assay Try to keep it in a sealed aluminum foil bag, plate and avoid the damp. Standard May be stored for up to 1 month at 2 - 8° C. If Biotin-antibody don't make recent use, better keep it store at HRP-avidin -20°C. Biotin-antibody Diluent Opened kit HRP-avidin Diluent Sample May be stored for up to 1 month at 2 - 8°C. Diluent Wash Buffer TMB Substrate Stop Solution *Provided this is within the expiration date of the kit.
    Date de péremption
    6 months
  • Antigène Voir toutes PARP1 Kits ELISA
    PARP1 (Poly (ADP-Ribose) Polymerase 1 (PARP1))
    Autre désignation
    poly (ADP-ribose) polymerase 1 (PARP1 Produits)
    Synonymes
    ADPRT Kit ELISA, ADPRT 1 Kit ELISA, ADPRT1 Kit ELISA, ARTD1 Kit ELISA, PARP Kit ELISA, PARP-1 Kit ELISA, PPOL Kit ELISA, pADPRT-1 Kit ELISA, Adprt Kit ELISA, Parp-1 Kit ELISA, 5830444G22Rik Kit ELISA, AI893648 Kit ELISA, Adprp Kit ELISA, Adprt1 Kit ELISA, C80510 Kit ELISA, parp-1 Kit ELISA, sPARP-1 Kit ELISA, BEST:LD21673 Kit ELISA, CG17685 Kit ELISA, CG17696 Kit ELISA, CG17718 Kit ELISA, CG40411 Kit ELISA, D.PARP Kit ELISA, Dm.pARTa Kit ELISA, Dmel\\CG40411 Kit ELISA, LD21673.3prime Kit ELISA, PARP1 Kit ELISA, dPARP Kit ELISA, parp Kit ELISA, adprt1 Kit ELISA, padprt-1 Kit ELISA, ppol Kit ELISA, si:dkey-206f10.3 Kit ELISA, wu:fc60f12 Kit ELISA, zgc:110092 Kit ELISA, poly(ADP-ribose) polymerase 1 Kit ELISA, poly (ADP-ribose) polymerase 1 Kit ELISA, poly (ADP-ribose) polymerase family, member 1 Kit ELISA, Poly-(ADP-ribose) polymerase Kit ELISA, poly(ADP-ribose) polymerase 1 L homeolog Kit ELISA, PARP1 Kit ELISA, Parp1 Kit ELISA, Parp Kit ELISA, parp1.L Kit ELISA, parp1 Kit ELISA
    Sujet

    Abbreviation: PARP1

    Alias: RP11-125A15.2, ADPRT, ADPRT1, PARP, PARP-1, PPOL, pADPRT-1, ADP-ribosyltransferase (NAD+, poly (ADP-ribose) polymerase)|ADP-ribosyltransferase NAD(+)|poly (ADP-ribose) polymerase family, member 1|po

    UniProt
    P09874
    Pathways
    Apoptose, Caspase Cascade in Apoptosis, Réparation de l'ADN, Production of Molecular Mediator of Immune Response, Maintenance of Protein Location
Vous êtes ici:
Support technique